Gallery
Mosman (I)
Staircase Specifications:
- Closed Riser
- Pine (Paint Grade) Cut Face Stringer
- Pine (Paint Grade) Closed Wall Stringer
- American Oak Treads w 1/2 Round Nosing
- 30mm End Grain
- American Oak Bulnose Tread
- Pine (Paint Grade) Risers Mitred To Stringer
- American Oak 1/4 Winder
- American Oak 1/4 Landing
Balustrade Specifications:
- 115mm GN7 Grand Classic Newel Post
- 115mm PT19 Hammer HN160 Post Top
- 31mm B1 Square Balusters
- S1 Moulded American Oak Handrail
- BP1 Balustrade Floor Capping
Builder: Reliant Constructions
Postcode: 2008 State: NSW
Artarmon
Staircase w/ Custom Timber Screen Feature!
Staircase Specifications:
- Open Riser
- Pine Closed Face Stringer - Paint Grade
- Vic Ash Closed Wall Stringer - Select Grade
- Vic Ash Treads with 1/2 Round Nosing
- Two Alloy Non-Slip Strips
- Nosing 20mm over Riser
- Vic Ash Nibs
- 65x40 S2 Contemporary Vic Ash Wallrail
- Code: IF457XS4H Stainless Steel Wall Brackets
Screen Specifications:
- 90 x 40 Victorian Ash Square Aris Balusters
- 2 Per Tread Spacing Detail
Note: Paint & Stain By Others
Builder: Arnold Constructions
State: NSW Postcode: 2064
Beverley Park
Our Beverley Park Staircase was a simple renovation to an existing staircase for a more modern approach, and the result was outstanding!
Staircase Specifications:
- LAM Blackbutt Treads
- Half Round Nosing
- MDF Risers
- 1/4 Blackbutt Landing
- 115 x 115 (GN7) Pine Grand Classic Newel Post
- 115 x 115 (PT19) Hammer Pine Post Top
- 30 x 30 Pine Square Balusters
- (S1- Moulded) 65 x 65 Blackbutt Rail
Note: Paint & Stain By Others
Postcode: 2217 State: NSW
Killara
Specifications:
- Cut Stringer Design
- Traditional Scotia under each Nosing
- Timber Treads for Dark Stain
- 115mm Grand Newel Posts
- Detailed Post Tops & Beading
- 65mm Traditional Timber Handrail
Note: Paint By Others
Location: NSW (2071)
Job Type: Renovation
Araluen
The Araluen is an Closed Rise, Cut String Staircase using custom painted turned balusters and posts.This design incorporates a continuous S1 – Moulded Blackbutt Handrail complete with volutes and handcrafted bends in order to produce a continuous handhold throughout the entire staircase.
Specifications:
- Closed Riser
- Cut Stringer
- (S1) Moulded Blackbutt Handrail
- Continuous Rail with Handcrafted Bends
- Custom Turned Balusters for Paint
- Custom Turned Posts for Paint
- Frets & Scotia Included for Heritage Design
Note: Stain & Paint By Others
Job Type: New Build
