Gallery

Specifications:

• 30mm American Oak Treads
• 30mm Overhang | End Grain Detail
• 18mm Pine Risers Mitered to Stringer
• Cut Pine Stringers
• 12mm Frameless Clear Toughened Glass
• 38mm S-Steel Patch Fittings P/Coated Mannex Black
• 25x21 S-Steel Channel P/Coated Mannex Black
• 38mm S-Steel Round Wall Rail on Brackets P/Coated Mannex Black

Note: Stain/Paint By Others
Builder: Home Impact
Location: NSW (2040)
Job Type: New Build

Specifications:

• Closed Pine Riser Mitred to Stringer
• Pine Stringers for Paint
• 30mm Blackbutt Treads with 1/2 Round Nosing
• 30mm over riser nosing overhang
• Three Tread Grooves (non-slip)
• Blackbutt 1/4 Landing
• 115 x 115 (GN9) Pine Grand Panelled Post
• 115 x 115 (PT19) Pine Post Top
• 40 x 40 Tapered Pine Balusters - For Paint
• (S1-Moulded) 65 x 65 Victorian Ash Handrail
• (BP1) Victorian Ash Balustrade Floor Capping
• (WT3A) Pine Well Trim

Note: Paint/Stain By Others
Builder: Jocon Building
Location: NSW (2070)
Job Type: New Build

Bottom Half Staircase Specifications:

• Closed Pine Riser Mitered to Cut Stringer
• 80mm Spotted Gum Treads w/ Square Aris Nosing
• 20mm over riser (End Grain detail)
• Bullnose Details
• 1/4 Landing

Top Half Staircase Specifications:

• Open Riser
• 80mm Spotted Gum Treads w/ Square Aris Nosing
• 40mm Spotted Gum Cut Stringers
• Stringers set in 100mm from end of tread
• Spotted Gum Floor Capping

Balustrade Specifications:

• 12mm Toughened Clear Glass
• 25 x 20 Stainless Steel Channel
• 38mm Stainless-Steel Patch Fittings
• 50mm Round Stainless-Steel Handrail
• Standard Stainless-Steel Brackets

*Swipe to see Before & After photos*
Note: Paint & Flooring By Others

Specifications:

• Closed MDF Stair for Timber Flooring Over
• 16mm Round Stainless-Steel Balusters PowderCoated White
• 16mm Round Solid Stainless-Steel Posts PowderCoated White
• (S6) Oval 65x40 American Oak Continuous Rail
• Rail Bends/Joins slightly curved
• P/Coated White Wall Rail Brackets
• American Oak Balustrade Floor Capping

*Swipe for Before & After*

Note: Paint/Stain & Flooring By Others
Location: NSW (2110)
Job Type: Renovation

Staircase Specifications:

• Closed Riser
• Pine (Paint Grade) Cut Face Stringer
• Pine (Paint Grade) Closed Wall Stringer
• American Oak Treads w 1/2 Round Nosing
• 30mm End Grain
• American Oak Bulnose Tread
• Pine (Paint Grade) Risers Mitred To Stringer
• American Oak 1/4 Winder
• American Oak 1/4 Landing

Balustrade Specifications:

• 115mm GN7 Grand Classic Newel Post
• 115mm PT19 Hammer HN160 Post Top
• 31mm B1 Square Balusters
• S1 Moulded American Oak Handrail
• BP1 Balustrade Floor Capping

Builder: Reliant Constructions
Postcode: 2008 State: NSW