Gallery
East Hills
Bottom Half Staircase Specifications:
- Closed Pine Riser Mitered to Cut Stringer
- 80mm Spotted Gum Treads w/ Square Aris Nosing
- 20mm over riser (End Grain detail)
- Bullnose Details
- 1/4 Landing
Top Half Staircase Specifications:
- Open Riser
- 80mm Spotted Gum Treads w/ Square Aris Nosing
- 40mm Spotted Gum Cut Stringers
- Stringers set in 100mm from end of tread
- Spotted Gum Floor Capping
Balustrade Specifications:
- 12mm Toughened Clear Glass
- 25 x 20 Stainless Steel Channel
- 38mm Stainless-Steel Patch Fittings
- 50mm Round Stainless-Steel Handrail
- Standard Stainless-Steel Brackets
*Swipe to see Before & After photos*
Note: Paint & Flooring By Others
Taren Point
A Classy and Contemporary Design.
Staircase Specifications:
- Mild Steel Mono Stringer P/Coated Textured Natural Pearl
- Open Riser
- Spotted Gum Treads
- Square Aris Nosing
- 30mm over riser - End Grain Detail
- Two Alloy Non-slip Strips
- Spotted Gym Nibs
- Spotted Gum 1/4 Landing
- 12mm Frameless Toughened Glass
- Stainless Steel 50mm Patch Fittings
- 50mm S10 Round Stainless Steel Handrail
- 25mm Stainless Steel Channel To Void Glass
- Spotted Gum Well Trim
Note: Paint & Stain By Others
State: NSW Postcode: 2229
JANNALI.1
Specifications:
- 30mm Blackbutt Treads
- 5mm Shadow Line + End Grain Detail
- Non-Slip Strips
- Vic Ash Face Cut Stringer for Paint
- Blackbutt Closed Risers
- Toughened Frameless Glass
- 50mm Stainless Steel Patch Fittings
- 38mm Round Stainless Steel Wall Rail
Note: Paint/Stain By Others
Location: NSW (2226)
Darlinghurst.1
This staircase is designed and constructed to match the contemporary open plan living design seen in many home renovations. This NSW Spotted Gum Staircase was constructed around the concealed glass fixings. This simple line becomes the focus of the staircase. The balustrades on this staircase were a major focus as we did not want to draw attention away from other design features.
Staircase Specifications:
- 30mm Spotted Gum Treads
- 1/2 Round Nosing
- End Grain Detail
- Vic Ash Cut Face Stringer
- Spotted Gum Risers w/ 5mm Shadow Line
- 1/2 Landing
- 12mm Toughened Clear Frameless Glass
- Stainless Steel Patch Fittings (hidden by stringer)
- 50mm Stainless Steel Round Handrail
- Spotted Gum Balustrade Floor Capping
Note: Stain By Others
Location: NSW (2010)
Job Type: Renovation
MORUYA
This cut string staircase was designed to incorporate both a Cut stringer and Closed stringer. This Glass balustrade is held using 50mm Round Stainless Steel posts with 50mm D-Patch Fittings with Capping to the void edge to ensure a stylish and firm fixing point for the stainless steel posts.
Specifications:
- Timber Treads & Risers
- Cut Face Stringer & Closed Wall Stringer
- 10mm Toughened Framed Glass
- 50mm Round Stainless-Steel Posts
- 50mm Stainless-Steel D-Patch Fittings
- 50mm Round Top Fixed Timber Rail
Note: Stain By Others
Job Type: New Build
