Gallery

Specifications:

• 30mm American Oak Treads
• 30mm Overhang | End Grain Detail
• 18mm Pine Risers Mitered to Stringer
• Cut Pine Stringers
• 12mm Frameless Clear Toughened Glass
• 38mm S-Steel Patch Fittings P/Coated Mannex Black
• 25x21 S-Steel Channel P/Coated Mannex Black
• 38mm S-Steel Round Wall Rail on Brackets P/Coated Mannex Black

Note: Stain/Paint By Others
Builder: Home Impact
Location: NSW (2040)
Job Type: New Build

Specifications:

• Blackbutt Treads & Risers
• Square Aris Nosing
• 5mm Shadow Line
• Cut Stringers For Paint
• 12mm Clear Toughened Frameless Glass
• 65x40 Blackbutt Rail

Note: Stain/Paint By Others
Location: NSW (2232)
Job Type: Renovation

Bottom Half Staircase Specifications:

• Closed Pine Riser Mitered to Cut Stringer
• 80mm Spotted Gum Treads w/ Square Aris Nosing
• 20mm over riser (End Grain detail)
• Bullnose Details
• 1/4 Landing

Top Half Staircase Specifications:

• Open Riser
• 80mm Spotted Gum Treads w/ Square Aris Nosing
• 40mm Spotted Gum Cut Stringers
• Stringers set in 100mm from end of tread
• Spotted Gum Floor Capping

Balustrade Specifications:

• 12mm Toughened Clear Glass
• 25 x 20 Stainless Steel Channel
• 38mm Stainless-Steel Patch Fittings
• 50mm Round Stainless-Steel Handrail
• Standard Stainless-Steel Brackets

*Swipe to see Before & After photos*
Note: Paint & Flooring By Others

Our Gladesville Staircase, a stunning artistic feature for your home!

Staircase Specifications:

• Full Victorian Ash Timber Staircase
• 90x40 Timber Screen & Balustrade
• Timber Screen Fitted to Side of Treads
• Open Rise
• Face Mono Stringer
• Wall Cut Stringer
• Square Aris Nosing on Treads
• 20mm Over Riser End Grain Detail
• 1/4 Landing
• Bulnose Treads
• S2 Contemporary Wallrail
• 443 SPP Zinc Alloy Wall Brackets                      (Note: Images were taken whilst painting was incomplete)
• Floor Capping

Postcode: 2111 State: NSW

Staircase Specifications:

• Closed Riser
• Pine (Paint Grade) Cut Face Stringer
• Pine (Paint Grade) Closed Wall Stringer
• American Oak Treads w 1/2 Round Nosing
• 30mm End Grain
• American Oak Bulnose Tread
• Pine (Paint Grade) Risers Mitred To Stringer
• American Oak 1/4 Winder
• American Oak 1/4 Landing

Balustrade Specifications:

• 115mm GN7 Grand Classic Newel Post
• 115mm PT19 Hammer HN160 Post Top
• 31mm B1 Square Balusters
• S1 Moulded American Oak Handrail
• BP1 Balustrade Floor Capping

Builder: Reliant Constructions
Postcode: 2008 State: NSW