Gallery

Specifications:

• 30mm American Oak Treads
• 30mm Overhang | End Grain Detail
• 18mm Pine Risers Mitered to Stringer
• Cut Pine Stringers
• 12mm Frameless Clear Toughened Glass
• 38mm S-Steel Patch Fittings P/Coated Mannex Black
• 25x21 S-Steel Channel P/Coated Mannex Black
• 38mm S-Steel Round Wall Rail on Brackets P/Coated Mannex Black

Note: Stain/Paint By Others
Builder: Home Impact
Location: NSW (2040)
Job Type: New Build

Staircase Specifications:

• Mild Steel Mono Stringer P/Coated Black
• Meranti Treads w/ Pencil Round Nosing
• 20mm Over Riser End Grain Detail
• Meranti Nibs
• Meranti 1 Tread Winder

Note:
Balustrade & Rail By Others
(Although Oz Stair offers this Glass Design also)
Paint & Stain By Others

Builder: Elco Constructions
Postcode: 2198 State: NSW  

A Classy and Contemporary Design.

Staircase Specifications:

• Mild Steel Mono Stringer P/Coated Textured Natural Pearl
• Open Riser
• Spotted Gum Treads
• Square Aris Nosing
• 30mm over riser - End Grain Detail
• Two Alloy Non-slip Strips
• Spotted Gym Nibs
• Spotted Gum 1/4 Landing
• 12mm Frameless Toughened Glass
• Stainless Steel 50mm Patch Fittings
• 50mm S10 Round Stainless Steel Handrail
• 25mm Stainless Steel Channel To Void Glass
• Spotted Gum Well Trim

Note: Paint & Stain By Others
State: NSW  Postcode: 2229

Specifications:

• 30mm Blackbutt Treads
• 5mm Shadow Line + End Grain Detail
• Non-Slip Strips
• Vic Ash Face Cut Stringer for Paint
• Blackbutt Closed Risers
• Toughened Frameless Glass
• 50mm Stainless Steel Patch Fittings
• 38mm Round Stainless Steel Wall Rail

Note: Paint/Stain By Others
Location: NSW (2226)

Specifications:

• 32mm Grey Ironbark Treads & Risers
• 8mm Shadowline Detail to Risers
• Sawtooth Stringer
• 12mm Toughened Frameless Glass
• 50mm Round Stainless-Steel Patch Fittings
• 50×25 Stainless-Steel Handrail
• Two Aluminium Flat Bars for Non-Slip

Notes: 
Paint & Stain By Others.
The reason behind using a 32mm tread and riser is to create a jagged line of the same width from the ceiling to the floor below.
The Aluminium Bars protrude the top face of the tread by 1mm to give traction as you navigate the flight.
This material rarely used due to it’s availability is one of the densest and highly durable timbers on the market.
This inspired design from Stuart Wilson Construction in a project in the north shore is just another example of the quality of work produced by Stuart.
Builder: Stuart Wilson Construction