Gallery

Specifications:

• Blackbutt Treads & Risers
• Square Aris Nosing
• 5mm Shadow Line
• Cut Stringers For Paint
• 12mm Clear Toughened Frameless Glass
• 65x40 Blackbutt Rail

Note: Stain/Paint By Others
Location: NSW (2232)
Job Type: Renovation

Specifications:

• Closed Pine Riser Mitred to Stringer
• Pine Stringers for Paint
• 30mm Blackbutt Treads with 1/2 Round Nosing
• 30mm over riser nosing overhang
• Three Tread Grooves (non-slip)
• Blackbutt 1/4 Landing
• 115 x 115 (GN9) Pine Grand Panelled Post
• 115 x 115 (PT19) Pine Post Top
• 40 x 40 Tapered Pine Balusters - For Paint
• (S1-Moulded) 65 x 65 Victorian Ash Handrail
• (BP1) Victorian Ash Balustrade Floor Capping
• (WT3A) Pine Well Trim

Note: Paint/Stain By Others
Builder: Jocon Building
Location: NSW (2070)
Job Type: New Build

Specifications:

• 30mm Blackbutt Treads
• 5mm Shadow Line + End Grain Detail
• Non-Slip Strips
• Vic Ash Face Cut Stringer for Paint
• Blackbutt Closed Risers
• Toughened Frameless Glass
• 50mm Stainless Steel Patch Fittings
• 38mm Round Stainless Steel Wall Rail

Note: Paint/Stain By Others
Location: NSW (2226)

Specifications:

• 32mm Grey Ironbark Treads & Risers
• 8mm Shadowline Detail to Risers
• Sawtooth Stringer
• 12mm Toughened Frameless Glass
• 50mm Round Stainless-Steel Patch Fittings
• 50×25 Stainless-Steel Handrail
• Two Aluminium Flat Bars for Non-Slip

Notes: 
Paint & Stain By Others.
The reason behind using a 32mm tread and riser is to create a jagged line of the same width from the ceiling to the floor below.
The Aluminium Bars protrude the top face of the tread by 1mm to give traction as you navigate the flight.
This material rarely used due to it’s availability is one of the densest and highly durable timbers on the market.
This inspired design from Stuart Wilson Construction in a project in the north shore is just another example of the quality of work produced by Stuart.
Builder: Stuart Wilson Construction

Specifications:

• Timber Treads & Risers
• Cut Face Stringer & Closed Wall Stringer
• 10mm Toughened Framed Glass
• 50mm Round Stainless-Steel Posts
• 50mm Stainless-Steel D-Patch Fittings
• 50mm Round Top Fixed Timber Rail

Note: Stain By Others
Job Type: New Build