Gallery

Specifications:

• Closed Pine Riser Mitred to Stringer
• Pine Stringers for Paint
• 30mm Blackbutt Treads with 1/2 Round Nosing
• 30mm over riser nosing overhang
• Three Tread Grooves (non-slip)
• Blackbutt 1/4 Landing
• 115 x 115 (GN9) Pine Grand Panelled Post
• 115 x 115 (PT19) Pine Post Top
• 40 x 40 Tapered Pine Balusters - For Paint
• (S1-Moulded) 65 x 65 Victorian Ash Handrail
• (BP1) Victorian Ash Balustrade Floor Capping
• (WT3A) Pine Well Trim

Note: Paint/Stain By Others
Builder: Jocon Building
Location: NSW (2070)
Job Type: New Build

Staircase w/ Custom Timber Screen Feature!

Staircase Specifications:

• Open Riser
• Pine Closed Face Stringer - Paint Grade
• Vic Ash Closed Wall Stringer - Select Grade
• Vic Ash Treads with 1/2 Round Nosing
• Two Alloy Non-Slip Strips
• Nosing 20mm over Riser
• Vic Ash Nibs
• 65x40 S2 Contemporary Vic Ash Wallrail
• Code: IF457XS4H Stainless Steel Wall Brackets

Screen Specifications:

• 90 x 40 Victorian Ash Square Aris Balusters
• 2 Per Tread Spacing Detail

Note: Paint & Stain By Others
Builder: Arnold Constructions
State: NSW  Postcode: 2064

Specifications:

• Cut Stringer Design
• Traditional Scotia under each Nosing
• Timber Treads for Dark Stain
• 115mm Grand Newel Posts
• Detailed Post Tops & Beading
• 65mm Traditional Timber Handrail

Note: Paint By Others
Location: NSW (2071)
Job Type: Renovation

Specifications:

• 32mm Grey Ironbark Treads & Risers
• 8mm Shadowline Detail to Risers
• Sawtooth Stringer
• 12mm Toughened Frameless Glass
• 50mm Round Stainless-Steel Patch Fittings
• 50×25 Stainless-Steel Handrail
• Two Aluminium Flat Bars for Non-Slip

Notes: 
Paint & Stain By Others.
The reason behind using a 32mm tread and riser is to create a jagged line of the same width from the ceiling to the floor below.
The Aluminium Bars protrude the top face of the tread by 1mm to give traction as you navigate the flight.
This material rarely used due to it’s availability is one of the densest and highly durable timbers on the market.
This inspired design from Stuart Wilson Construction in a project in the north shore is just another example of the quality of work produced by Stuart.
Builder: Stuart Wilson Construction

Specifications:

• 30mm Blackbutt Treads
• Half Round Nosing
• 20mm Nosing Overhang
• Closed Pine Stringers
• Blackbutt Risers
• (N1) 90mm Square Blackbutt Newel Posts
• (PT1) 15mm Chamfered Post Tops
• (B1) 30mm Square Blackbutt Balusters
• 120x30 Rectangle Blackbutt Handrail
• 90x40 Rectangle Vertical Blackbutt Screen

Note: Paint & Stain By Others
Location: NSW (2118)
Job Type: Renovation