Gallery
LOFTUS
Specifications:
- Blackbutt Treads & Risers
- Square Aris Nosing
- 5mm Shadow Line
- Cut Stringers For Paint
- 12mm Clear Toughened Frameless Glass
- 65x40 Blackbutt Rail
Note: Stain/Paint By Others
Location: NSW (2232)
Job Type: Renovation
MORUYA
This cut string staircase was designed to incorporate both a Cut stringer and Closed stringer. This Glass balustrade is held using 50mm Round Stainless Steel posts with 50mm D-Patch Fittings with Capping to the void edge to ensure a stylish and firm fixing point for the stainless steel posts.
Specifications:
- Timber Treads & Risers
- Cut Face Stringer & Closed Wall Stringer
- 10mm Toughened Framed Glass
- 50mm Round Stainless-Steel Posts
- 50mm Stainless-Steel D-Patch Fittings
- 50mm Round Top Fixed Timber Rail
Note: Stain By Others
Job Type: New Build
TARANNA
This Laminated Victorian Ash Staircase was constructed around its Sawtooth stringer. The treads and stringers are 42mm thick and overhang the Face and edges by 20mm. The reason behind using a 42mm stringer to ensure strength within the staircase, the open rise design requires a bit more planning than your standard staircase to ensure that it will be self supporting.
Specifications:
- 42mm LAM Vic Ash Treads
- 20mm Nosing Overhang
- Open Risers
- Vic Ash Nibs
- 42mm Vic Ash Stringers
- 10mm Toughened Framed Glass
- 50mm Round Stainless-Steel Posts
- 50mm Round Vic Ash Top Fixed Rail
- Two Aluminium Flat Bars for Non-Slip
Note: Stain By Others
Job Type: Renovation
