Gallery

Specifications:

• 40mm Closed Curved Pine Face Stringer
• 30mm Cut Pine Wall Stringer
• 30mm Victorian Ash Treads | 1/2 Round Nosing
• 20mm Nosing Overhang
• 18mm Victorian Ash Risers
• 1/4 Victorian Ash Landing
• 16mm Round Mild Steel Balusters P/Coat Black
• 65x40 (S6-Oval) Victorian Ash Handrail
• 280x40 (WT10A) Pine Well Trim

Note: Stain/Paint By Others
Location: NSW (2080)
Job Type: New Build

Specifications:

• Closed Pine Riser Mitred to Stringer
• Pine Stringers for Paint
• 30mm Blackbutt Treads with 1/2 Round Nosing
• 30mm over riser nosing overhang
• Three Tread Grooves (non-slip)
• Blackbutt 1/4 Landing
• 115 x 115 (GN9) Pine Grand Panelled Post
• 115 x 115 (PT19) Pine Post Top
• 40 x 40 Tapered Pine Balusters - For Paint
• (S1-Moulded) 65 x 65 Victorian Ash Handrail
• (BP1) Victorian Ash Balustrade Floor Capping
• (WT3A) Pine Well Trim

Note: Paint/Stain By Others
Builder: Jocon Building
Location: NSW (2070)
Job Type: New Build

Special Santorini Styled Curved Staircase & Wall Balustrade!

Specifications:

• Closed MDF Risers for Flooring Over
• 25mm MDF Treads For Flooring Over
• Victorian Ash Face Stringer (For Strength)
• Pine Cut Wall Stringer
• 1/4 Landing
• Balustrade Wall made from LVL Stud

Note: Paint, Wall Finishes & Timber Flooring By Others
Location: NSW (2030)
Builder: HP Constructions

Bottom Half Staircase Specifications:

• Vic Ash 2931mm Wide Treads w/ 20mm Shadowline
• Square Aris Nosing
• Closed Riser
• Vic Ash 30x30 Nibs
• Vic Ash 1/2 Landing

Top Half Staircase Specifications:

• Open Riser
• Pine For Paint Closed Face & Wall Stringer
• GN7 - Grand Classic 90x90 Pine Newel Post
• PT19 - Hammer JN160 Pine Post Top
• B1 - Square 30x30 Pine Balusters
• S1 - Moulded Vic Ash Handrail & Wall Rail
• SS443 Stainless Steel Brackets 304 Brushed
• Vic Ash Stringer & Floor Capping

Note: Paint & Stain By Others
Postcode: 2166 State: NSW

Staircase Specifications:

• Closed Riser
• Pine (Paint Grade) Cut Face Stringer
• Pine (Paint Grade) Closed Wall Stringer
• American Oak Treads w 1/2 Round Nosing
• 30mm End Grain
• American Oak Bulnose Tread
• Pine (Paint Grade) Risers Mitred To Stringer
• American Oak 1/4 Winder
• American Oak 1/4 Landing

Balustrade Specifications:

• 115mm GN7 Grand Classic Newel Post
• 115mm PT19 Hammer HN160 Post Top
• 31mm B1 Square Balusters
• S1 Moulded American Oak Handrail
• BP1 Balustrade Floor Capping

Builder: Reliant Constructions
Postcode: 2008 State: NSW