Gallery

Specifications:

• 60mm Closed American Oak Face Stringer
• 30mm Cut Pine Wall Stringer
• 30mm American Oak Treads | Square Aris Nosing
• 30mm Overhang | End Grain Detail
• Groove for LED Lighting
• 18mm American Oak Risers
• 12mm Clear Toughened Frameless Glass
• Sandwiched Glass Design
• 50x40 American Oak Handrail
• Custom 30x18 American Oak Soffit Lining

Note: Staining/Stealing & LED By Others 
Location: NSW (2229)
Job Type: Renovation

Specifications:

• Closed Pine Riser Mitred to Stringer
• Pine Stringers for Paint
• 30mm Blackbutt Treads with 1/2 Round Nosing
• 30mm over riser nosing overhang
• Three Tread Grooves (non-slip)
• Blackbutt 1/4 Landing
• 115 x 115 (GN9) Pine Grand Panelled Post
• 115 x 115 (PT19) Pine Post Top
• 40 x 40 Tapered Pine Balusters - For Paint
• (S1-Moulded) 65 x 65 Victorian Ash Handrail
• (BP1) Victorian Ash Balustrade Floor Capping
• (WT3A) Pine Well Trim

Note: Paint/Stain By Others
Builder: Jocon Building
Location: NSW (2070)
Job Type: New Build

Specifications:

• Closed MDF Stair for Timber Flooring Over
• 16mm Round Stainless-Steel Balusters PowderCoated White
• 16mm Round Solid Stainless-Steel Posts PowderCoated White
• (S6) Oval 65x40 American Oak Continuous Rail
• Rail Bends/Joins slightly curved
• P/Coated White Wall Rail Brackets
• American Oak Balustrade Floor Capping

*Swipe for Before & After*

Note: Paint/Stain & Flooring By Others
Location: NSW (2110)
Job Type: Renovation

Specifications:

• Vic Ash Cut Face Stringer
• Pine (Paint Grade) Closed Wall Stringer
• Blackbutt Treads w/ Pencil Round Nosing
• 20mm over riser - End Grain Detail
• Blackbutt Risers - Sanded End Grain
• N1-Square Blackbutt Newel Posts
• SS1-Plain Bar Stainless Steel Balusters
• S2-Contemporary Blackbutt Handrail
• Blackbutt Floor Capping & Well Trim

Please Note: This design required approval from governing building authorities as it does not meet NCC requirements.

Postcode: 2042  State: NSW

Staircase Specifications:

• Closed Riser
• Pine (Paint Grade) Cut Face Stringer
• Pine (Paint Grade) Closed Wall Stringer
• American Oak Treads w 1/2 Round Nosing
• 30mm End Grain
• American Oak Bulnose Tread
• Pine (Paint Grade) Risers Mitred To Stringer
• American Oak 1/4 Winder
• American Oak 1/4 Landing

Balustrade Specifications:

• 115mm GN7 Grand Classic Newel Post
• 115mm PT19 Hammer HN160 Post Top
• 31mm B1 Square Balusters
• S1 Moulded American Oak Handrail
• BP1 Balustrade Floor Capping

Builder: Reliant Constructions
Postcode: 2008 State: NSW