Gallery
LOFTUS
Specifications:
- Blackbutt Treads & Risers
- Square Aris Nosing
- 5mm Shadow Line
- Cut Stringers For Paint
- 12mm Clear Toughened Frameless Glass
- 65x40 Blackbutt Rail
Note: Stain/Paint By Others
Location: NSW (2232)
Job Type: Renovation
East Hills
Bottom Half Staircase Specifications:
- Closed Pine Riser Mitered to Cut Stringer
- 80mm Spotted Gum Treads w/ Square Aris Nosing
- 20mm over riser (End Grain detail)
- Bullnose Details
- 1/4 Landing
Top Half Staircase Specifications:
- Open Riser
- 80mm Spotted Gum Treads w/ Square Aris Nosing
- 40mm Spotted Gum Cut Stringers
- Stringers set in 100mm from end of tread
- Spotted Gum Floor Capping
Balustrade Specifications:
- 12mm Toughened Clear Glass
- 25 x 20 Stainless Steel Channel
- 38mm Stainless-Steel Patch Fittings
- 50mm Round Stainless-Steel Handrail
- Standard Stainless-Steel Brackets
*Swipe to see Before & After photos*
Note: Paint & Flooring By Others
Darlinghurst.1
This staircase is designed and constructed to match the contemporary open plan living design seen in many home renovations. This NSW Spotted Gum Staircase was constructed around the concealed glass fixings. This simple line becomes the focus of the staircase. The balustrades on this staircase were a major focus as we did not want to draw attention away from other design features.
Staircase Specifications:
- 30mm Spotted Gum Treads
- 1/2 Round Nosing
- End Grain Detail
- Vic Ash Cut Face Stringer
- Spotted Gum Risers w/ 5mm Shadow Line
- 1/2 Landing
- 12mm Toughened Clear Frameless Glass
- Stainless Steel Patch Fittings (hidden by stringer)
- 50mm Stainless Steel Round Handrail
- Spotted Gum Balustrade Floor Capping
Note: Stain By Others
Location: NSW (2010)
Job Type: Renovation
MORUYA
This cut string staircase was designed to incorporate both a Cut stringer and Closed stringer. This Glass balustrade is held using 50mm Round Stainless Steel posts with 50mm D-Patch Fittings with Capping to the void edge to ensure a stylish and firm fixing point for the stainless steel posts.
Specifications:
- Timber Treads & Risers
- Cut Face Stringer & Closed Wall Stringer
- 10mm Toughened Framed Glass
- 50mm Round Stainless-Steel Posts
- 50mm Stainless-Steel D-Patch Fittings
- 50mm Round Top Fixed Timber Rail
Note: Stain By Others
Job Type: New Build
TARANNA
This Laminated Victorian Ash Staircase was constructed around its Sawtooth stringer. The treads and stringers are 42mm thick and overhang the Face and edges by 20mm. The reason behind using a 42mm stringer to ensure strength within the staircase, the open rise design requires a bit more planning than your standard staircase to ensure that it will be self supporting.
Specifications:
- 42mm LAM Vic Ash Treads
- 20mm Nosing Overhang
- Open Risers
- Vic Ash Nibs
- 42mm Vic Ash Stringers
- 10mm Toughened Framed Glass
- 50mm Round Stainless-Steel Posts
- 50mm Round Vic Ash Top Fixed Rail
- Two Aluminium Flat Bars for Non-Slip
Note: Stain By Others
Job Type: Renovation
